Floor Scrubber Parts

8 products

Floor scrubber parts selection

Match the machine interface before choosing a wear part.

Use the machine model, part dimensions, mounting pattern, voltage, connector, material and operating duty together. A familiar-looking brush, squeegee, motor, battery or charger is not enough to confirm compatibility.

IdentifyMachine model, serial reference and current part number.
MeasureDiameter, width, hub, mounting, connector and cable reach.
Check dutyFloor finish, soil, operating hours, chemicals and wear pattern.
Confirm supplyIncluded hardware, quantity, replacement interval and warranty exclusions.

Compatibility and wear schedule Brush, pad and squeegee guide

GR-FCB-330530

GR-FCB-330530 Scrub Brush Pad

Replaceable floor-machine brush with soft, medium, stiff, or grit options for compatible hard floors.

Common Diameter: Approx. 13–22 in
Product Type: Floor scrubber disc brush
Brush Options: Soft, medium, stiff, and grit-impregnated

GR-FCD-330530

GR-FCD-330530 Pad Driver

Machine-specific pad driver for holding compatible cleaning, scrubbing, and polishing pads.

Common Diameter: Approx. 13–21 in
Product Type: Floor scrubber pad driver
Pad Retention: Hook or short-pin gripping surface

GR-FCS-6001300

GR-FCS-6001300 Scrubber Squeegee Blade

Replaceable squeegee blade in gum rubber, polyurethane, or wear-resistant compounds for wastewater recovery.

Common Length: 600–1,300 mm
Material Options: Gum rubber / polyurethane / wear-resistant rubber
Fit Details: Front or rear position, profile, hole pattern

GR-FCV-CFG

GR-FCV-CFG Vacuum Motor

Replacement vacuum motor for compatible floor scrubbers; voltage, airflow interface, mounting, and machine model must be confirmed.

Product Type: Floor scrubber vacuum motor
Motor Configuration: Tangential discharge vacuum motor
Selection Inputs: Machine model, voltage, motor label, stages, discharge, and mounting

GR-FCDM-CFG

GR-FCDM-CFG Drive Motor

Drive motor and gearbox assembly for compatible floor scrubbers; voltage, stroke, mounting, load, and controls are machine-specific.

Product Type: Floor scrubber drive motor and gearbox assembly
Configuration: DC motor with mechanical drive assembly
Selection Inputs: Machine model, motor label, voltage, mounting, travel, load, and connector

GR-FCC-24V15A

GR-FCC-24V15A 24V 15A LiFePO4 Battery Charger

Portable charger with 24 V DC, 15 A output for compatible LiFePO₄ floor-scrubber battery systems.

Output Voltage: 24 V DC
Product Type: Portable LiFePO₄ battery charger
Output Current: 15 A

GR-FCP-305560

GR-FCP-305560 Polishing Pad

Color-coded cleaning, scrubbing, stripping, buffing, and polishing pads in common 12–22 in sizes.

Common Diameter: 12–22 in
Common Grades: Polish / buff / clean / scrub / strip
Color Guide: White, red, blue, green, brown, black

GR-FCB-24V100AH

GR-FCB-24V100AH LiFePO₄ Battery for Floor Scrubbers

25.6 V 100 Ah LiFePO₄ battery with 2.56 kWh stored energy and more than 2,500 rated life cycles.

Nominal Voltage: 25.6 V
Nominal Capacity: 100 Ah
Original Series / Reference: GT24100

Parts sourcing support

Can’t find the part you need?

Tell us the brand and model you currently use, then leave the rest to us. We can help identify compatible parts, accessories, and operating supplies for a simpler, more cost-effective purchase.

One-stop sourcing, with Geararo.