Floor Scrubber Brush, Pad and Squeegee Selection Guide
Most floor-scrubber performance problems are not caused by the main machine. Brushes, pads, pad drivers and squeegee blades must fit the floor, the soil and the machine’s mechanical interface.
Short answer: Coated vinyl, epoxy, terrazzo, textured tile and concrete need different levels of agitation. Separate daily soil from oil, tyre marks, finish removal and restoration work before choosing a tool.
Start with the floor and the soil
Coated vinyl, epoxy, terrazzo, textured tile and concrete need different levels of agitation. Separate daily soil from oil, tyre marks, finish removal and restoration work before choosing a tool.
Brush and pad colour is not a universal standard
Colour can be a useful guide within one product range but does not prove material, stiffness or intended use across brands. Confirm the product material, diameter, thickness and task.
The drive interface is as important as the diameter
Different machines use different hubs, drive tabs, centre openings and locking structures. Send the installed machine brand and model, the old part reference and photographs before ordering.
Squeegee blades determine water recovery
Confirm front or rear position, length, width, thickness, profile, hole pattern, usable edges and material. Blade material should be selected from the recovered liquid, floor texture and the manufacturer’s data.
Replace parts before the cleaning route fails
Poor recovery, streaks, excessive water, vibration or reduced agitation can indicate a worn blade, blocked vacuum path, damaged brush or incorrect accessory. Inspect the whole working assembly.
| Part | Confirm before ordering |
|---|---|
| Brush | Diameter, bristle material, stiffness and hub |
| Pad | Diameter, thickness, aggression and centre opening |
| Pad driver | Drive tabs, clutch, hub and locking system |
| Squeegee blade | Position, profile, holes, material and dimensions |
Information to prepare before requesting a quotation
- Machine brand and model
- Photos of the installed part and interface
- Working diameter or blade dimensions
- Floor finish and soil
- Required material, colour or hardness
- Quantity and maintenance schedule
Frequently asked questions
Can I choose a pad only by colour?
No. Colour is not a universal standard. Confirm material, aggression, dimensions and the machine interface.
Why does a scrubber leave water?
Check blade wear and adjustment, vacuum hose and seals, tank condition, floor flatness and the correct blade profile.
Need a configuration review?
Send the measurements, installed references and required result for Floor Scrubber Brush, Pad and Squeegee Selection Guide. Geararo can identify open compatibility questions before the quotation is finalized.
Contact Geararo